Oztec Flexible Shafts
When transmitting power from the power source to the vibrating head, select one of Oztec's flexible shafts. Oztec Flexible Shaft inner cores are made from extra-high carbon steel wires with casings made from tough abrasion resistant neoprene rubber, reinforced with multiple layers of high tensile wire braiding with a hardened flat steel liner.
Quick Disconnect Feature
Oztec's "Quick Disconnect" feature, allows shaft removal from the power unit with the twist of a lever. The lightweight and bearing-less coupling allows the job to be done in seconds without any tools. This fitting will not rust or seize.
Standard lengths (in feet): 2, 5, 7, 10, 12, 14, 16, 18 and 21.
All dimensions shown are nominal, actual dimensions may vary. Call for details.
Oztec Flexible Shafts can be coupled to 42 feet using a ball bearing shaft connector #6725A1.
Oztec Shafts have been successfully coupled to 65 feet. Custom lengths are available. For either situation, call Oztec for details at: 1-800-533-9055.
Pencil Shafts for Pencil Head vibrators are available in 3, 6, 9, 11, 15 and 20 foot lengths.
(Pencil Shafts cannot be coupled together, but can be lengthened, by coupling to a standard shaft with coupling P/N: 6725A1).
Flexible Shaft Adapters
Taking advantage of Oztec's quality doesn't mean a major reinvestment to replace all your existing equipment. Oztec Supplies motors, shafts and heads (steel only) that are interchangeable with most other makes. Oztec makes various style core and casing adapters which allow other manufacturers flexible shafts and heads to be used with Oztec motors or other motors with Oztec flexible shafts and heads."
Manufacturer's Page:
http://www.oztec.com/flexible_shafts.htm