DIGGA AUGERS FOR SKID STEER LOADERS 1-2.5T
Digga's drilling augers for skid steer loaders are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.
Fitted with Digga / Eaton bell motors and input housing,he innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimizing your returns.
Digga drilling augers are backed by industry leading warranty and local factory support.
FEATURES
Compact Digga manufactured gearbox
Digga designed Eaton motor with optional intergrated pressure relief valve to eliminate the need for bulky valve blocks and reduce many potential leak points
2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
Lifetime shaft pull out warranty
5 year gearbox and 3 year motor warranty
Over 30 years design and manufacturing experience
Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
1DSS SPECS
Torque (FT-LBS @ 3000 PSI): 1,467
Max Torque (FT-LBS @ 3500 PSI): 1,712
Recommended Flow: 6-16
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 16 GPM
Max Flow (Do Not Exceed): 30 GPM @ 1800 PSI
Max Horse Power: 33
Pressure Relief Valve: N/A
Standard Output Shaft: 2" Hex
Recommended Auger: A4/RC4
Max Drilling Diameter (Clay/Shale): 12"
Max Drilling Diameter (Earth): 24"
Weight (lbs): 101
Overall Length (in): 24.5"
Diameter (in): 7.4"
2DSS SPECS
Torque (FT-LBS @ 3000 PSI): 2,254
Max Torque (FT-LBS @ 3500 PSI): 2,630
Recommended Flow: 10-26
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 16 GPM
Max Flow (Do Not Exceed): 30 GPM @ 1800 PSI
Max Horse Power: 33
Pressure Relief Valve: N/A
Standard Output Shaft: 2" Hex
Recommended Auger: A4/RC4
Max Drilling Diameter (Clay/Shale): 24"
Max Drilling Diameter (Earth): 30"
Weight (lbs): 123
Overall Length (in): 25.9"
Diameter (in): 7.4"
Manufacturer's Page:
https://www.diggausa.com/augers-1-2.5T.php