DIGGA'S TRUCK CRANE & TELEHANDLER AUGERS
Digga's range of drilling augers for truck cranes and telehandlers are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.
Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions.
Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.
FEATURES
Compact high torque Digga manufactured gearbox
Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
Lifetime shaft pull out warranty
5 year gearbox and 3 year motor warranty
Over 30 years design and manufacturing experience
Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
5DDS SPECS
Torque (FT-LBS @ 3000 PSI): 3,903
Max Torque (FT-LBS @ 3500 PSI): 4,553
Recommended Flow: 10-36
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 27 GPM
Max Flow (Do Not Exceed): 55 GPM @ 1700 PSI
Max Horse Power: 55
Pressure Relief Valve: INCLUDED
Standard Output Shaft: 2.5" Hex
Recommended Auger: A6/RC6
Max Drilling Diameter (Clay/Shale): 24"
Max Drilling Diameter (Earth): 40"
Weight (lbs): 290
Overall Length (in): 33.7"
Diameter (in): 11.4"
6DDS SPECS
Torque (FT-LBS @ 3000 PSI): 4,909
Max Torque (FT-LBS @ 3500 PSI): 5,728
Recommended Flow: 12-36
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 27 GPM
Max Flow (Do Not Exceed): 55 GPM @ 1700 PSI
Max Horse Power: 55
Pressure Relief Valve: INCLUDED
Standard Output Shaft: 2.5" Hex
Recommended Auger: A6/RC6
Max Drilling Diameter (Clay/Shale): 30"
Max Drilling Diameter (Earth): 40"
Weight (lbs): 290
Overall Length (in): 33.7"
Diameter (in): 11.4"
7DDS SPECS
Torque (FT-LBS @ 3000 PSI): 6,162
Max Torque (FT-LBS @ 3500 PSI): 7,189
Recommended Flow: 14-36
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 27 GPM
Max Flow (Do Not Exceed): 55 GPM @ 1700 PSI
Max Horse Power: 55
Pressure Relief Valve: INCLUDED
Standard Output Shaft: 2.5" Hex
Recommended Auger: A6/RC6
Max Drilling Diameter (Clay/Shale): 30"
Max Drilling Diameter (Earth): 48"
Weight (lbs): 290
Overall Length (in): 33.7"
Diameter (in): 11.4"
9DDS SPECS
Torque (FT-LBS @ 3000 PSI): 7,811
Max Torque (FT-LBS @ 3500 PSI): 9,112
Recommended Flow: 18-48
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 29 GPM
Max Flow (Do Not Exceed): 55 GPM @ 1800 PSI
Max Horse Power: 60
Pressure Relief Valve: INCLUDED
Standard Output Shaft: 2.5" Hex
Recommended Auger: A8/RC8
Max Drilling Diameter (Clay/Shale): 48"
Max Drilling Diameter (Earth): 48"
Weight (lbs): 350
Overall Length (in): 37.2 "
Diameter (in): 11.4"
Manufacturer's Page:
https://www.diggausa.com/truck-cranes-telehandlers.php