top of page

2 SPEED AUGERS FOR EXCAVATORS 15-30T

Digga's range of drilling augers for 15-30t excavators are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

Fitted with a radial piston motor, an integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions.

FEATURES
2 speed drive system
Compact high torque Digga manufactured gearbox
Radial piston motor with integrated pressure relief valve (PRV), eliminating the need for bulky valve blocks
Reduces potential leak points
ECV (Energy Control relief Valve) fitted standard
Extreme duty shaft locking system
No complex hoses, valving or filtration
Can also be used as a screw anchor drive
1 year gearbox & 1year motor warranty

2 SPEED AUGERS FOR EXCAVATORS 15-30T

SD45 SPECS
Max Torque (FT-LBS @ 3500 PSI): 32,892 FT-LBS
Motor Type: Radial Piston
Max Pressure (Do Not Exceed): 3500 PSI @ 100 GPM
Max Flow (Do Not Exceed): 100 GPM @ 3,500 PSI
Max Horse Power: 201
Pressure Relief Valve: INCLUDED
Energy Control Valve: INCLUDED
Standard Output Shaft: 100 MM Square
Recommended Auger: RC11/RC11
Max Auger Diameter (Clay/Shale): 60"
Max Auger Diameter (Earth): 79"
Weight (lbs): 1843
Overall Length (in): 50.9"
Diameter (in): 23.6"

SD50 SPECS
Max Torque (FT-LBS @ 3500 PSI): 38,569 FT-LBS
Motor Type: Radial Piston
Max Pressure (Do Not Exceed): 3500 PSI @ 100 GPM
Max Flow (Do Not Exceed): 100 GPM @ 3,500 PSI
Max Horse Power: 201
Pressure Relief Valve: INCLUDED
Energy Control Valve: INCLUDED
Standard Output Shaft: 100 MM Square
Recommended Auger: RC11/RC11
Max Auger Diameter (Clay/Shale): 60"
Max Auger Diameter (Earth): 79"
Weight (lbs): 1843
Overall Length (in): 50.9"
Diameter (in): 23.6"

SD50 SPECS
Max Torque (FT-LBS @ 3500 PSI): 50,465 FT-LBS
Motor Type: Radial Piston
Max Pressure (Do Not Exceed): 3500 PSI @ 100 GPM
Max Flow (Do Not Exceed): 100 GPM @ 3,500 PSI
Max Horse Power: 201
Pressure Relief Valve: INCLUDED
Energy Control Valve: INCLUDED
Standard Output Shaft: 100 MM Square
Recommended Auger: RC11/RC11
Max Auger Diameter (Clay/Shale): 60"
Max Auger Diameter (Earth): 79"
Weight (lbs): 1843
Overall Length (in): 50.9"
Diameter (in): 23.6"

Manufacturer's Page:
https://www.diggausa.com/excavator-15-30T-2-speed.php

bottom of page